Unit Nov.30, 2014… This also applies if you had purchased since August 2014 No tags for this post.
Only a few days days left… No tags for this post.
Only a few days days left… This also applies if you had purchased since August 2014 No tags for this post.
This may not be the way to do it, but works Clean off all the oil with a decreaser like brake cleaner (product with hydrocarbon solvents) would do an excellent nice job. Here is the active bluing-removal agent — white vinegar. See, bluing isn’t all that protective after all. This is marked as being distilled […]
How do I prepare metal for a “dip only”? If you are sending your project in for a “dip”, we do not do any metal preparation for you. It must arrive in the shop completely rust-free and polished to your satisfaction. Please do not send any rusty parts for a dip – no matter how light the rust, bluing will […]
Come in on Oct 4th 2014 and mention this ad and the first 5 customer will get a free shirt and the chance to save up to 15%. No tags for this post.
Type of Finishes Factory Finish – We polish the metal to a 400-grit finish prior to bluing for a semi-gloss finish. This is an equivalent or better polish than most standard factory blued finishes. Custom Polish Finish – We hand polish the metal to a 400 or 600-grit finish with a lengthwise hand polish. Custom Satin Finish – […]
GUNSMITH BARREL THREADING At Hammer Down Range, we offer barrel threading services. We can do imperial or metric threads. BARREL THREADING 1/2 -28 Minimum charge is $45.00 to $175.00 9/16-24 Minimum charge is $45.00 to $175.00 5/8-24 Minimum charge is $45.00 to $175.00 M12 x 1 Minimum charge is $45.00 to $175.00 M14 x 1 Minimum charge […]