2015 - Onling Guns

Custom AK47 Flash Hider

By: administrator On: December 03, 2015 Gunsmithing Comments Disabled

Custom AK47 Flash Hider We took a job when the customer brought in a AK that he had purchased and the barrel had been cut with a hacksaw and there was no possible way to add a flash hider on the muzzle. Since the owner could not do anything to install a normal offered flash […]

Cerakote Coating in Black Color

By: administrator On: December 03, 2015 Gunsmithing Comments Disabled

Cerakote Coating in Black Color

Gunsmithing

Cerakote Coating in Black Color Here is another cerakote aka cerakoting job that we preformed at our Loveland, OH location within the Cincinnati tri-state area. If you are thinking of doing you own Cerakote at home you have to make sure to do your prep work carefully. The prep work is the most important and time […]

Ruger 10-22 Barrel Threading

By: administrator On: December 03, 2015 Gunsmithing Comments Disabled

Ruger 10-22 Barrel Threading

Gunsmithing

Ruger 10-22 Barrel Threading When we thread Ruger 10-22 barrels we are able to save the front sight for a bit of an extra cost if you would like to keep it more original. The way that we do it is that we cut the barrel to 16.2500″ and then we drill the through the […]

Smith & Wesson Model 10

By: administrator On: December 03, 2015 Gunsmithing Comments Disabled

Smith & Wesson Model 10

Gunsmithing

Smith & Wesson Model 10 We took on a bluing job to re-blue a Smith & Wesson Model 10-8 which a buddy of a buddy tried to help out and ended up messing up the gun. In taking the job we removed the old bluing and re-polished the area that needed and sanded the areas […]

Cerakote Coating in Drab Color

By: administrator On: November 29, 2015 Gunsmithing, News Comments Disabled

Cerakote Coating in Drab Color

Gunsmithing,News

Cerakote Coating in Drab Color Here is another cerakote aka cerakoting job that we preformed at our Loveland, OH location within the Cincinnati tri-state area. If you are thinking of doing you own Cerakote at home you have to make sure to do your prep work carefully. The prep work is the most important and […]

Post 64 Winchester Receiver

By: administrator On: November 29, 2015 Gunsmithing Comments Disabled

Post 64 Winchester Receiver

Gunsmithing

Post 64 Winchester Receiver Onling Guns Gunsmith GunShop Bluing in Loveland, OH within the Cincinnati tri-state area. In the 1960’s Winchester Model 94 was redesigned to for a more economical method of production. Redesigning the receivers were machined from a graphitic steel casting to reduce most of the costs. This new material would not accept […]

Cerakote

By: administrator On: July 02, 2015 Gunsmithing, News Comments Disabled

Cerakote

Gunsmithing,News

GUNSMITH CERAKOTE At Onling Guns, we offer cerakoting service. Cerakote out-performs any competitive gun coating in both laboratory settings and real world applications. View and buy firearm coatings and locate a custom applicator for your next project. Features Excellent wear resistance and corrosion Maximum flexibility Maximum adhesion and hardness Easy application Cerakote Firearm Coatings improve performance and […]

Suppressed Henry Rifle

By: administrator On: June 01, 2015 Gunsmithing Comments Disabled

Suppressed Henry Rifle

Gunsmithing

Suppressed Henry Rifle Here at Onling Guns located in the greater Cincinnati area our gunsmith department took a Henry Rifle H001 and shortened the barrel then threaded it to 1/2″ x 28 in order to add a Gemtech Outback II to make this rifle suppressed (silencer) The customer wanted to suppress the rife for shooting […]