AR – Onling Guns

ATF 41F

By: administrator On: June 01, 2016 News Comments Disabled

ATF 41F The last couple of years with the fight against ATF 41P. The rule was finalized and published in the Federal Register on the morning of (1/15/2016). The new ATF 41F brings many new changes to how this industry works, but here are the main things to keep in mind: Here is the full Ruling […]

Ithica 37 feather weight

By: administrator On: March 26, 2016 Custom, Gunsmithing Comments Disabled

Ithica 37 feather weight

Custom,Gunsmithing

Ithica 37 feather weight Cerakote H-146Q We took a Ithica 37 feather weight and bead blasted it with #70 glass and used Blank Graphite H-146Q Cerakote to refinish the barrel and receiver. Receiver finish Tags: AK, AR, Barrel, blank, cerakote, cerakote coating, class, gun, H-146, H-146Q, service, used

Rossi .44 Lifter Arm Issue

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

Rossi .44 Lifter Arm Issue

Gunsmithing

Rossi .44 Mag Lifter Arm Issue We had a new Rossi .44 Mag come in; however, the charging lever wouldn’t work. The cartridge would not load into the battery. We had to polish the lifter arm because it was rubbing onto the receiver. This means that the changing lever wouldn’t lift. We started with a […]

Iver Johnson Top Break is Broken and Can’t be Fixed

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

Iver Johnson Top Break is Broken and Can’t be Fixed

Gunsmithing

Iver Johnson Top Break is Broken and Can’t be Fixed Unfortunately, the lifter arm is broken on this Iver Johnson Top Breaker. With a lifter arm being broken, this won’t allow the cylinder to rotate. We are not able to order a part for this specific gun at this time. Check us out, daily! We […]

Over Under Shotgun Porting

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

Over Under Shotgun Porting

Gunsmithing

Over Under Shotgun Porting Our gunsmith decided to work on the barrels of the shotgun as a challenge, today. In order to work on the barrels of the shotgun, our gunsmith had to rotate them–along with the milling machine as well. The milling machine needed to be rotated at 30 degrees; whereas, the barrels needed […]

Fixed Barrel Lug

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

Fixed Barrel Lug

Gunsmithing

Fixed Barrel Lug We had barrel from a Star firearm with a broken lug. Our gunsmith re-welded and pinned the lug back on. Re-welding and pinning the lug back onto the barrel would ensure that the lug wouldn’t break again. Below, are some images to show the broken lug on the barrel: Check us out, […]

Cold Bluing Touch Ups

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

Cold Bluing Touch Ups

Gunsmithing

Cold Bluing Touch Ups Bluing touch ups give any gun a “new look” with its ability to de-rust the metal (sort of like putting a penny in a cup of Cola). Even though the process is “cold” bluing, we use heat–along with a lot of coats to give a better look. “44/40 has long been […]

Crackshot Lever Action Fix

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

Crackshot Lever Action Fix

Gunsmithing

Crackshot Lever Action Fix This Crackshot .22 LR had a loose lever. Unfortunately, this a significant problem if the gun cannot fire. Our gunsmith decided to take on the challenge, today. The first thing that was necessary to do was replace the piece that enabled the lever to remain steady. The gun was then tested […]