Barrel Archives - Onling Guns

Ithica 37 feather weight

By: administrator On: March 26, 2016 Custom, Gunsmithing Comments Disabled

Ithica 37 feather weight Cerakote H-146Q We took a Ithica 37 feather weight and bead blasted it with #70 glass and used Blank Graphite H-146Q Cerakote to refinish the barrel and receiver. Receiver finish Tags: AK, AR, Barrel, blank, cerakote, cerakote coating, class, gun, H-146, H-146Q, service, used

Over Under Shotgun Porting

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

Over Under Shotgun Porting

Gunsmithing

Over Under Shotgun Porting Our gunsmith decided to work on the barrels of the shotgun as a challenge, today. In order to work on the barrels of the shotgun, our gunsmith had to rotate them–along with the milling machine as well. The milling machine needed to be rotated at 30 degrees; whereas, the barrels needed […]

Fixed Barrel Lug

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

Fixed Barrel Lug

Gunsmithing

Fixed Barrel Lug We had barrel from a Star firearm with a broken lug. Our gunsmith re-welded and pinned the lug back on. Re-welding and pinning the lug back onto the barrel would ensure that the lug wouldn’t break again. Below, are some images to show the broken lug on the barrel: Check us out, […]

Colt Barrel Replacement

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

Colt Barrel Replacement

Gunsmithing

Colt Barrel Replacement Today, our gunsmith was given an interesting task. A customer had a Colt .45 gun with some major damage done on the barrel. This was because the customer had taken a grinder to the barrel; it eventually scrapped the entire part. Our gunsmith had no choice but to give the Colt .45 […]

AK Flash Hider Original

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

AK Flash Hider Original

Gunsmithing

AK Flash Hider Original With our gunsmith service, we decided to try something new. We took an AK Flash Hider and decided to add two parts. It was something our skilled gunsmith whom wanted to try out a new project with this gun. Our gunsmith took an AK Flash Hider without any threading–or a detente […]

ATI-15 Gas Port Fix

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

ATI-15 Gas Port Fix

Gunsmithing

We recently got a AR-15 from ATI in our shop which had the gas port mis-alined with the blow back hole on the barrel. the rifle would not cycle so we adjusted the A-Frame and milled and shaved off some metal to re-aline the hole from the A-Frame to the barrel. Check us out, daily! […]

Cold Barrel Do Nots

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

Cold Barrel Do Nots

Gunsmithing

This is what not to do with a colt barrel, please do not let your friends/friends fix you guns bring it to a real gunsmith… The customer came in and said that it would not feed. This gun was a compact barrel so we ordered a 5.375 barrel and then cut to size on our […]

A Frame F Type

By: administrator On: March 10, 2016 Gunsmithing Comments Disabled

A Frame F Type

Gunsmithing

We can installed your F type A frames on your new barrels. Check us out, daily! We post a new blog everyday. -Staff at Onling Guns Tags: AR, Barrel, blog, Bluing, cincinnati, class, consignment, day, firearm, Goshen, gun, gun range, gunshop, gunsmith, gunsmith services, gunsmithing, gunsmithing services, gunstore, Indiana, Kentucky, Loveland, new, new guns, ohio, […]